1. The laser cutting head is a vulnerable item on the laser cutting machine, and long-term use can damage the laser cutting head.
2. Dust and dirt inside the machine should be vacuumed once a week, and all electrical cabinets should be strictly dust-proof.
3. Check the straightness of the fiber laser cutting machine track and the verticality of the machine, and promptly maintain and debug any abnormalities found. If not done in this way, the cutting effect may not be very good, the error will increase, and it will affect the cutting quality. This is the top priority and should be done this way.
4. The guide rails of the fiber laser cutting machine should be regularly cleaned to remove dust and other debris, ensuring the normal operation of the equipment. The racks should be regularly wiped and lubricated to ensure that there are no debris in the lubrication. The guide rail should be cleaned and lubricated regularly, and the motor should be cleaned and lubricated regularly. Machines can move better, cut more accurately, and the quality of cut products will be improved.
Startup process of fiber laser cutting machine:
1. Place the material flat on the cutting platform.
2. Select the appropriate gas and start the air compressor.
3. Start the chiller.
4. Start the laser.
5. Turn on the power of the cutting machine.
Operate the console, input the cutting pattern, adjust parameters, and start cutting.
During the processing, the cutting situation should be observed at all times. If there is a possibility of collision with the cutting head, cutting should be stopped in a timely manner and continued after eliminating the danger.